Jotun Anti-Skid is aluminium oxide grains, intended to be spread into the last coat in a non-skid system. Available in extra coarse,
coarse, medium and fine particle sizes.
For use on decks, floors, gangways and other areas where additional friction properties are required. The spreading is to take
place in the wet film during application.
Fine particle size (180 - 250 µm) for coatings applied in 50 to 150 µm DFT, such as topcoats. The recommended usage is
1,5 - 2,0 kg per 10 litres of paint
Medium particle size (400 - 600 µm) for coatings applied in 150 to 400 µm DFT, such as Jotamastic products and thick film
The recommended usage is 2,5 - 3,3 kg per 10 litres of paint
Coarse particle size (700 - 1000 µm) for coatings applied in 400 to 1500 µm DFT, such as Baltoflake products. The
recommended usage is 3,0 - 4,0 kg per 10 litres of paint
Extra Coarse particle size (1200 - 1600 µm) for coatings applied in 400 to 1500 µm DFT, such as Baltoflake products.
The recommended usage is 3,5 - 4,0 kg per 10 litres of paint
If a more rough surface is required, the quantity may be increased.
Solids (Vol %)* 100 ±
Flash Point N.A.
*Measured according to ISO 3233:1998 (E)
Hong Kong rules: Category of paints - Other vessel coatings; Exempt compound - N/A; Specific gravity:
3.92 kg/ltr (Coarse); 3.92 kg/ltr (Fine); 3.92 kg/ltr (Medium); 3.92 kg/ltr (Extra Coarse). Both VOC and Specific gravity
values provided are typical values, subject to changes when different colour involved.
According to specifications for the chosen topcoat.
The coating may be used on other substrates. Please contact your local Jotun office for more information.